Slurry Pump
Home / Products / Slurry Pump

SP, SPR Series Submerged Slurry Pump

Structural characteristics

SP, SPR submerged pump is a vertical slurry pump, working under immersion liquid, used to transport abrasive, coarse particles, high concentration slurry, without any shaft seal and shaft seal water, in case of insufficient intake Can work normally.

The flow-through member can be made of a high-chromium wear-resistant metal material or a rubber material.


Structural characteristics

SP, SPR submerged pump is a vertical slurry pump, working under immersion liquid, used to transport abrasive, coarse particles, high concentration slurry, without any shaft seal and shaft seal water, in case of insufficient intake Can work normally.

The flow-through member can be made of a high-chromium wear-resistant metal material or a rubber material.

Applicable working conditions

Applicable to pit installation, widely used in mining, metallurgy, building materials, flue gas desulfurization and environmental protection projects.

Performance range

Discharge range: 40 ~ 300mm

Flow range: 7~1080m3/h

Head range: 5 ~ 42m

Model meaning

SP, SPR Series Submerged Slurry Pump


SP, SPR series submerged slurry pump basic parameters

SP, SPR Pump modelflowQ(m3/h)Head H(m)Rotating speedn(r/min)EffectiVenessη(%)Flow materialMaximum particle size(mm)Drainage path/inhalation diameter(mm)
40PV-SP10.8~365.5~271000~220038Antiwear alloy1240/100
40PV-SPR10.8~365.4~261000~220040rubber1240/100
65QV-SP23~1106.5~30.8700~150050Antiwear alloy1565/140
65QV-SPR22.5~1056.2~29.6700~150051rubber1565/140
100RV-SP54~2895.5~35500~120056Antiwear alloy32100/190
100RV-SPR64.8~2857.5~36600~120062rubber32100/190
150SV-SP108~4708.5~40500~100053Antiwear alloy45150/240
150SV-SPR144~4326.5~35500~100056rubber45150/240
200SV-SP180~8906.5~37500~100064Antiwear alloy65200/300
250TV-SP261~10807.5~34400~75060Antiwear alloy65250/360
300TV-SP288~12676.5~33350~70051Antiwear alloy65300/430


SP, SPR Series Submerged Slurry Pump